Xeerarka Goynta LQ-TOOL
Xeerarka Goynta Muraayada (CBM)
● Muraayad gees mindi fiiqan
● Laba nooc: 52°, 42°,30°
● Ku habboon jarista warqadda tirada ayaa ka yar 400000pcs
● Waxaa loo laabi karaa qaab kasta oo joomatari ah.
● Qalabka: DE
● gees:CB LCB
| Dhumucda | 0.53mm (1.5PT) | 0.71mm (2PT) |
| Dhererka | 23.6mm | 23.8mm |
| Dhumucda Qeexida | Tirada | Midabka jidhka | Xagasha gees | Odhaah |
| 0.71*23.6/23.8 | CBM-78 | Madoow/Cad | 30 darajo | Cidhifka Adag HRC55-56° Adag jidhka HRC 35-36° |
| 0.71*23.6/23.8 | CBM-88 | Madoow/Cad | 42/45 darajo | Cidhifka Adag HRC57-58° Adag jidhka HRC 37-38° |
| 0.71*23.6/23.8 | CBM-98 | Madoow/Cad | 52 darajo | Cidhifka Adag HRC58-59° Adag jidhka HRC 40-41° |
Shuruucda Goynta Shiida
● Midi af leh oo fiiqan oo xoqan
● Laba nooc: ＜52°, ＜42°, 30°
● Ku habboon jarista warqadda tirada ayaa ka yar 200000pcs
● Waxaa loo laabi karaa qaab kasta oo joomatari ah
Waxyaabaha: KR, DE
Cidhifka: A.CB, B.LCB
| Dhumucda | 0.71mm (2PT) |
| Dhererka | 22.8-30mm |
| Dhumucda Qeexida | Tirada | Midabka jidhka | Odhaah |
| 0.71mm | GL-70 | Jidhka Dahabka | Core Hardness Hrc36-37 (Jilicsan) |
| GL-80 | Hardness Core 38-39 ( Dhexdhexaad ) | ||
| GLD-70 | Qalabka Jarmalka (Jilicsan) | ||
| GLD-80 | Qalabka Jarmalka (Medium) |
Xeerarka Goynta Gillet (GE)
Cidhifku waa fiiqan yahay oo fiiqan, waxay ka dhigaysaa awoodda makaanikada-isbeddel qoto dheer.
Loo isticmaalo qaab-Goynta calaamadaha koollada, PVC iyo alaabada kale ee dharbaaxada
Waxyaabaha: CN, DE
Cidhifka: A.CB, B.LCB
| Dhumucda | 0.53mm (1.5PT) | 0.71mm (2PT) |
| Dhererka | 23.6mm | 23.8mm |
| Dhumucda Qeexida | Tirada | Midabka jidhka | Odhaah |
| 0.71mm | GE-70 | Jirka buluug-madow | Core Hardness Hrc36-37 (Jilicsan) |
| GE-80 | Jirka buluug-madow | Hardness Core 38-39 ( Dhexdhexaad ) | |
| GED-80 | Jirka buluug-madow | Qalabka Jarmalka | |
| 1.07mm | GRB-70 | Jirka buluug-madow | Core Hardness Hrc36-37 (Jilicsan) |
| GRB-80 | Jirka buluug-madow | Hardness Core 38-39 ( Dhexdhexaad ) | |
| GRB-90 | Jirka buluug-madow | Hardness Core 40-41 (Hard) |
Xeerarka summada mindida isku dhejisa (HL)
Loo isticmaalo samaynta dhammaan noocyada sumadaha xabagta
Waxaa loo laabi karaa qaab kasta oo joomatari ah
Qalabka: CN JP GM
Cidhif:A: Mindi hal daab ah CB, B:Laba daab LCB
| Dhumucda | 0.45mm (1.27PT) |
| Dhererka | 7.0-12.0mm |
| Dhumucda Qeexida | Tirada | Midabka jidhka | Odhaah |
| 0.45mm | HL-50 | Cidhif Cad | Hardness Core HRC41-43 |
| HL-60 | Cidhifka Madow | Hardness Core HRC39-40 | |
| HL-70 | Jidhka Cad | Hardness Core HRC39-40 | |
| HL-80 | Jidhka Dahabka | Hardness Core HRC39-40 |
Xeerarka Goynta Gaarka ah (KL)
Loo isticmaalo spacers, caag, fiber iyo wixii la mid ah, gabal goynta ayaa dhaafi kara ilaa 800000pcs
Waxaa loo laabi karaa qaab kasta oo joomatari ah.
Qalabka: CN JP GM
Cidhif:A: Mindi hal daab ah CB, B:Laba daab LCB
| Dhumucda Qeexida | Tirada | Midabka jidhka | Odhaah |
| 0.71mm | KL-70 | Jirka buluug-madow | Xuddunta Hardness HRC 36-37°( jilicsan) |
Goynta Bisadda Madow (BL)
Loo isticmaalo spacers ， caag ， fiber iyo wixii la mid ah, gabal goyntu waxay dhaafi kartaa ilaa 800000pcs.
Waxaa loo laabi karaa qaab kasta oo joomatari ah.
Qalabka: CN JP GM
Cidhif:A: Mindi hal daab ah CB, B:Laba daab LCB
| Dhumucda Qeexida | Tirada | Midabka jidhka | Odhaah |
| 0.71mm | BL-80 | Jirka buluug-madow | Hardness Core HRC 36-39°( Dhexdhexaad) |
Xeerarka Wanaajinta (WL)
1. Ilkaha labajibbaaran 3 ilig/1", 4 ilig/1", 6ilig/1", 8 ilig/1", {1:1}, 10ilig/1", 16ilig/1"
2. Loo isticmaalo qaab-jaridda biilka
Qalab:□CN
Cidhif: Shiidida Cidhif
| Dhumucda | 0.45mm (1.27PT) | 0.71mm (2PT) | ||
| Dhererka | 8mm | 23.6mm | 23.8mm | |
| Cabbirka | 1:1;2:1;3:1;6:1;8:1;10:1;12:1;16:1 | |||
| Dhumucda Qeexida | Tirada | Midabka jidhka | Odhaah |
| 0.71mm | WL-90 | Jirka buluug-madow | Hardness Core HRC 40-41° (Hard) |
Xeerarka Ilkaha fiiqan (WLS)
1. Laba koox gooya
2. Ilkaha fiiqan 16 ilig/1''
3. Waxaa loo isticmaalaa nasasho cajiib ah si tartiib tartiib ah Qeexitaan:510×8.16×0.75mm(xeerka Foomka Ganacsiga gees ka gees),
Waxyaabaha: CN, JP, GM
Cidhifka: CB, LCB
| Dhumucda | 0.71mm(2PT) |
| Dhererka | 23.0-23.8mm |
| dhumucda qeexida | Tirada | Sharax | Odhaah(qallafsanaan)shuruudaha |
| 0.71mm | WLS-90 | Jirka buluug-madow | Hardness Core Hrc40 ~ 41(Adag) |
Gooye hal dhinac ah (DEX)
1. Loo isticmaalo qaab-goynta xagal toosan
Waxyaabaha: CN, JP, GM
Dhinaca: CB, LCB
| Dhumucda | 0.71mm (2PT) | 1.07mm (3PT) |
| Dhererka | 22.8-50.0mm | |
| dhumucda qeexida | Tirada | Sharax | Remark (adkeydka) shuruudaha |
| 0.71mm | DEX-90 | Jirka buluug-madow | Hardness Core Hrc40 ~ 41 (Hard) |
Xeerarka Goynta Sare (DLX)
1 Waxa loo isticmaalaa qaab-jarista kartoonka iyo wixii la mid ah
Waxyaabaha: CN, JP, GM
Dhinaca: CB, LCB
| Dhumucda | 0.71mm (2PT) | 1.07mm (3PT) |
| Dhererka | 30.0-50.0mm | |
| Dhumucda Qeexida | Tirada | Sharax | Odhaah |
| 0.71mm | DLX-80 | Jirka buluug-madow | Hardness Core Hrc38 ~ 39 (dhexdhexaad ah) |
| 1.07mm | DLE-80 |
Xeerarka la ruxruxo(BL)
1. Dhererka soo jiidashada waxaa loo sameeyaa si waafaqsan codsigaaga
2. Waxa loo isticmaalaa sanduuqa iyo kartoonka A NOOCKA 10 PCS/B NOOCKA 8PCS/C NOOCKA 6PCS/D NOOCKA 4.5PCS/E NOOCA 3PCS
Waxyaabaha: CN, JP, GM
Cidhifka: CB, LCB
| Dhumucda | 0.71mm (2PT) |
| Dhererka | 23.6-23.8mm |
| Dhumucda Qeexida | Tirada | Sharax | Odhaah |
| 0.71mm | BL-70 | Jirka buluug-madow | Hardness Core Hrc 36 ~ 37 |
Abuurista Xeerarka
1 Dhererka soo jiidashada ayaa loo sameeyay si waafaqsan codsigaaga
2 Dhumucdiisuna waa (2PT) 0.71mm, (3PT)1.07mm,(4PT)1.42mm,(6PT)2.10mm
Waxyaabaha: CN, JP, GM
Dhinaca: CB, LCB
| Dhumucda | 0.71mm (2PT) | 1.07mm (2PT) | 1.42mm (2PT) | 2.10mm (2PT) |
| Dhererka | 22.8-30.0mm | |||
| Dhumucda Qeexida | Tirada | Sharax | Odhaah |
| 0.71mm | EL-90 | Jirka buluug-madow | Hardness Core Hrc 41 ~ 43 |
| ELD-90 | Jidhka Cad | Hardness Core Hrc43 ~ 45 | |
| EL-70 | Taiwan | Hardness Core Hrc38 ~ 39 ( Dhexdhexaad ) | |
| EL-80 | Taiwan | Hardness Core Hrc35 ~ 36 (Jilicsan) | |
| 1.07mm | ELD-70 | Jirka buluug-madow | Hardness Core Hrc37 |
| ELD-80 | Jirka buluug-madow | Hardness Core Hrc39 | |
| 1.42mm | ELC-70 | Jirka buluug-madow | Hardness Core Hrc36 |
| 2.1mm | ELB-70 | Jirka buluug-madow | Hardness Core Hrc35 |
| 0.71mm | EV-90 | Jirka buluug-madow | Hardness Core Hrc41 ~ 43 |
Soo koobida walxaha ka kooban mindida goynta dhinta
| Nooca Mindida | Mindi-Beed-hooseeya/Midi-cagaar sare leh oo leh laba-marxalad/ Midi dhinac-keliya |
| Nooca Birta | /S50C/C55 |
| Dhumucda (mm) | 0.45/0.53/2pt/3pt/4pt/6pt |
| Dhererka (mm) | 7.0/8.0/9.5/12/23.5/23.6/23.7/23.8/30-100mm |
| Adag jirka (Hrc) | 33/37/41/45/48/ |
| Harag adag (Hrc) | 54/56/58/60/ |
| Xagasha Blade | ∠30°∠42°∠52° |
| Kuwo kale | Adkeynta daawaynta kulaylka inta jeer ee aad u saraysa, shiidida cidhifyada mindida, farsamaynta muraayada cidhifka. |
Xeerarka kala duwan ee dulqaadka dhumucda GOYNTA
| DhumucdaOdhaahda | Tixraac | CaalamiHeerka | Heerarka Shirkadaha | |
| Dulqaad | Min Max | |||
| 0.45 | 0.44 | ±0.025 | ± 0.010 | 0.430 ilaa 0.450 |
| 2PT | 0.71 | ±0.030 | ± 0.010 | 0.700 ilaa 0.720 |
| 3PT | 1.05 | ±0.040 | ± 0.010 | 1.050 ilaa 1.070 |
| 4PT | 1.42 | ±0.050 | ± 0.015 | 1.395 ilaa 1.425 |
Saamaynta Xagasha Blade ee Alaabta
Xulashada Blade
1. Farqiga u dhexeeya Midiyaha afafka sare iyo kuwa hooseeya
Farqiga u dhexeeya mindiyaha afafka sare iyo kuwa hooseeya ayaa ah in mindida fiiqan ay ku saleysan tahay mindida hoose oo ka dibna ka jeexjeexa geesaha labada dhinac si ay daabkeedu u sii yaraado, guud ahaan qiyaastii 2mm.
Xidhmada
| Dhumucda | Tirada kartoonnada | Gariiradda |
| 0.45mm (1.27PT) | 100pcs/sanduuqa | 100M/ Gariir |
| 0.53mm (1.5PT) | 100pcs/sanduuqa | 100M/ Gariir |
| 0.71mm (2PT) | 100pcs/sanduuqa | 100M/ Gariir |
| 1.07mm (3PT) | 70pcs/sanduuqa | 70M / Gariiradda |
| 1.42mm (4PT) | 50pcs/sanduuqa | 50M / Gariiradda |
| 2.10mm (6PT) | 35 Kumbuyuutar / Sanduuqa | 35M/ Gariir |
Aagga codsiga
Dhimista-Goynta sanduuqa baakadaha
