LQ-TOOL Ho itšeha Melao
Mirror Cutting Rules (CBM)
● Etsa seipone se bohale ba thipa
● Mefuta e 'meli:＜52°,＜42°,＜30°
● E loketse ho seha pampiri palo e ka tlase ho 400000pcs
● E ka kobeha ho sebopeho leha e le sefe sa geometri.
● Boitsebiso: DE
● Moeli:CB LCB
| Botenya | 0.53mm (1.5PT) | 0.71mm (2PT) |
| Bophahamo | 23.6 limilimithara | 23.8 limilimithara |
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Lehlakore la bohale | Ela hloko |
| 0.71 * 23.6/23.8 | CBM-78 | Botsho/Bosweu | 30 degree | Edge Hardness HRC55-56° Boima ba 'mele HRC 35-36 ° |
| 0.71 * 23.6/23.8 | CBM-88 | Botsho/Bosweu | 42/45 likhato | Edge Hardness HRC57-58° Boima ba 'mele HRC 37-38 ° |
| 0.71 * 23.6/23.8 | CBM-98 | Botsho/Bosweu | 52 degree | Edge Hardness HRC58-59° Boima ba 'mele HRC 40-41 ° |
Ho Sila Melao ea ho Seha
● Ho hlapa ka bohale ba thipa e bohale
● Mefuta e 'meli: ＜52 °, ＜42 °, ＜30 °
● E loketse ho seha pampiri bongata bo ka tlase ho 200000pcs
● E ka kobeha ho sebopeho leha e le sefe sa geometri
lintho tse bonahalang: KR, DE
Bohareng: A.CB, B.LCB
| Botenya | 0.71mm (2PT) |
| Bophahamo | 22.8-30 limilimithara |
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Ela hloko |
| 0.71 limilimithara | GL-70 | 'Mele oa Khauta | Core Hardness Hrc36-37 (Bonolo) |
| GL-80 | Core Hardness 38-39 (Bohareng) | ||
| GLD-70 | Jeremane Materials (Soft) | ||
| GLD-80 | Lisebelisoa tsa Jeremane (Bohareng) |
Gillet Cutting Rules(GE)
Bohale bo bentšitsoe ebile bo bohale, bo etsa hore bokhoni ba mochini bo fetohe haholo.
E sebelisoa bakeng sa ho seha li-label tsa sekhomaretsi, PVC le thepa e 'ngoe ea slap-UP
lintho tse bonahalang: CN, DE
Bohareng: A.CB, B.LCB
| Botenya | 0.53 limilimithara (1.5PT) | 0.71 limilimithara (2PT) |
| Bophahamo | 23.6 limilimithara | 23.8 limilimithara |
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Ela hloko |
| 0.71 limilimithara | GE-70 | 'Mele o moputsoa-botšo | Core Hardness Hrc36-37 (Bonolo) |
| GE-80 | 'Mele o moputsoa-botšo | Core Hardness 38-39 (Bohareng) | |
| GED-80 | 'Mele o moputsoa-botšo | Lisebelisoa tsa Jeremane | |
| 1.07mm | GRB-70 | 'Mele o moputsoa-botšo | Core Hardness Hrc36-37 (Bonolo) |
| GRB-80 | 'Mele o moputsoa-botšo | Core Hardness 38-39 (Bohareng) | |
| GRB-90 | 'Mele o moputsoa-botšo | Core Hardness 40-41 (Hara) |
Leibole e laola thipa e ikgomaretsang (HL)
E sebelisetsoa ho etsa mefuta eohle ea li-labels tsa sekhomaretsi
E ka kobeha ho sebopeho leha e le sefe sa geometri
lintho tse bonahalang: CN JP GM
Bohale:A: Thipa ea lehare le le leng CB , B:Lehare le habeli LCB
| Botenya | 0.45mm (1.27PT) |
| Bophahamo | 7.0-12.0mm |
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Ela hloko |
| 0.45 limilimithara | HL-50 | White Edge | Boima ba mantlha HRC41-43 |
| HL-60 | Black Edge | Bothata ba Core HRC39-40 | |
| HL-70 | 'Mele o Mosoeu | Bothata ba Core HRC39-40 | |
| HL-80 | 'Mele oa Khauta | Bothata ba Core HRC39-40 |
Melao e Khethehileng ea ho Seha (KL)
E sebelisoa bakeng sa spacers, polasetiki, fiber joalo-joalo, sekhechana se sehang se ka feta ho 800000pcs.
E ka kobeha ho sebopeho leha e le sefe sa geometri.
lintho tse bonahalang: CN JP GM
Bohale:A: Thipa ea lehare le le leng CB , B:Lehare le habeli LCB
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Ela hloko |
| 0.71 limilimithara | KL-70 | 'Mele o moputsoa-botšo | Core Hardness HRC 36-37° (bonolo) |
Black Cat Cutting (BL)
E sebelisoa bakeng sa spacers, polasetiki, fiber joalo-joalo, sekhechana se sehang se ka feta ho 800000pcs.
E ka kobeha ho sebopeho leha e le sefe sa geometri.
lintho tse bonahalang: CN JP GM
Bohale:A: Thipa ea lehare le le leng CB , B:Lehare le habeli LCB
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Ela hloko |
| 0.71 limilimithara | BL-80 | 'Mele o moputsoa-botšo | Core Hardness HRC 36-39° (Bohareng) |
Perfpration Rules(WL)
1.Meno a lisekoere menono a 3/1”, meno a 4/1”, meno a 6/1”, meno a 8/1”, {1:1}, 10/1”, 16 /1”
2. E sebelisoa bakeng sa ho fokotsa foromo ea sekoloto
Boitsebiso: □CN
Bohale: Ho sila ka bohale
| Botenya | 0.45mm (1.27PT) | 0.71mm (2PT) | ||
| Bophahamo | 8mm | 23.6 limilimithara | 23.8 limilimithara | |
| Boholo | 1:1;2:1;3:1;6:1;8:1;10:1;12:1;16:1; | |||
| Tlhaloso ea Botenya | Nomoro | Mmala wa mmele | Ela hloko |
| 0.71 limilimithara | WL-90 | 'Mele o moputsoa-botšo | Core Hardness HRC 40-41° (Hathata) |
Melao ea meno a bohale (WLS)
1. Sehahi sa lihlopha tse peli
2. Meno a bohale a 16/1''
3. E sebelisoa bakeng sa khefu e tsotehang butle-butle Tlhaloso: 510 × 8.16 × 0.75mm (ka lehlakoreng le le leng moeli oa Molao oa Khoebo), (2: 1, 3: 1, 1: 1)
lintho tse bonahalang: CN, JP, GM
Boemo: CB,LCB
| Botenya | 0.71 limilimithara（2PT） |
| Bophahamo | 23.0-23.8mm |
| Botenya ba tlhaloso | Nomoro | Hlalosa | Ela hloko（thatafalo）ditlhoko |
| 0.71 limilimithara | WLS-90 | 'Mele o moputsoa-botšo | Bothata ba Core Hrc40~41（E thata） |
Sekha sa lehlakore le le leng(DEX)
1. E sebelisoa bakeng sa ho seha sebopeho sa angle e nepahetseng
lintho tse bonahalang: CN, JP, GM
Boemo: CB, LCB
| Botenya | 0.71mm (2PT) | 1.07mm (3PT) |
| Bophahamo | 22.8-50.0mm | |
| Botenya ba tlhaloso | Nomoro | Hlalosa | Ela hloko (bothata) litlhoko |
| 0.71 limilimithara | DEX-90 | 'Mele o moputsoa-botšo | Core Hardness Hrc40~41 (Hara) |
Melao e phahameng ea ho itšeha(DLX)
1 E sebelisoa bakeng sa ho seha sebopeho sa lebokose le joalo-joalo
lintho tse bonahalang: CN, JP, GM
Boemo: CB, LCB
| Botenya | 0.71mm (2PT) | 1.07mm (3PT) |
| Bophahamo | 30.0-50.0mm | |
| Tlhaloso ea Botenya | Nomoro | Hlalosa | Ela hloko |
| 0.71 limilimithara | DLX-80 | 'Mele o moputsoa-botšo | Core Hardness Hrc38~39 (Bohareng) |
| 1.07mm | DLE-80 |
Melao e Tloaelehileng(BL)
1.Bophahamo ba ho khahla bo etsoa ho latela kopo ea hau
2. E sebelisoa bakeng sa lebokose le lebokose la A TYPE 10 PCS/ B TYPE 8PCS /C TYPE 6PCS/D MOFUTA 4.5PCS/E MOFUTA 3PCS
lintho tse bonahalang: CN, JP, GM
QETELA: CB, LCB
| Botenya | 0.71mm (2PT) |
| Bophahamo | 23.6-23.8mm |
| Tlhaloso ea Botenya | Nomoro | Hlalosa | Ela hloko |
| 0.71 limilimithara | BL-70 | 'Mele o moputsoa-botšo | Matla a Mantlha Hrc 36~37 |
Ho theha Melao
1 Bophahamo ba ho khahla bo entsoe ho latela kopo ea hau
2 Botenya ke (2PT）0.71mm,(3PT)1.07mm,(4PT)1.42mm,(6PT)2.10mm
lintho tse bonahalang: CN, JP, GM
Boemo: CB, LCB
| Botenya | 0.71mm(2PT) | 1.07mm(2PT) | 1.42mm(2PT) | 2.10mm(2PT) |
| Bophahamo | 22.8-30.0mm | |||
| Tlhaloso ea Botenya | Nomoro | Hlalosa | Ela hloko |
| 0.71 limilimithara | EL-90 | 'Mele o moputsoa-botšo | Matla a Mantlha Hrc 41~43 |
| ELD-90 | 'Mele o Mosoeu | Boima ba Core Hrc43~45 | |
| EL-70 | Taiwan | Core Hardness Hrc38~39(Bohareng) | |
| EL-80 | Taiwan | Core Hardness Hrc35~36(Bonolo) | |
| 1.07mm | ELD-70 | 'Mele o moputsoa-botšo | Bothata ba Bohareng Hrc37 |
| ELD-80 | 'Mele o moputsoa-botšo | Bothata ba Bohareng Hrc39 | |
| 1.42 limilimithara | ELC-70 | 'Mele o moputsoa-botšo | Bothata ba Core Hrc36 |
| 2.1 limilimithara | ELB-70 | 'Mele o moputsoa-botšo | Bothata ba Bohareng Hrc35 |
| 0.71 limilimithara | EV-90 | 'Mele o moputsoa-botšo | Core Hardness Hrc41~43(Top Thin Creasing) |
Kakaretso ea likarolo tsa motsoako oa thipa e sehang
| Mofuta oa Thipa | Thipa e mahare a tlase/Thipa e mahare a phahameng e nang le methati e mmedi/ Thipa e Lehlakore le le Leng/ Thipa ya Leqhubu/ Thipa ya Leino/ Thipa e kopantseng |
| Mofuta oa tšepe | /S50C/C55 |
| Botenya(mm) | 0.45/0.53/2pt/3pt/4pt/6pt |
| Bophahamo(mm) | 7.0/8.0/9.5/12/23.5/23.6/23.7/23.8/30 ~100mm |
| boima ba 'mele (Hrc) | 33/37/41/45/48/ |
| Li-blade hardnes (Hrc) | 54/56/58/60/ |
| Blade Angle | ∠30° ∠42° ∠52° |
| Ba bang | Phekolo ea mocheso e phahameng ea maqhubu a thata, ho sila ka thipa, ho sebetsa ka seipone sa thipa. |
Botenya ba ho mamellana le mefuta e mengata ea melao ea CUTTING
| BotenyaPolelo | Referense | MachabaStandard | Mekhoa ea Khoebo | |
| Mamello | Min～Max | |||
| 0.45 | 0.44 | ±0.025 | ± 0.010 | 0.430–0.450 |
| 2PT | 0.71 | ±0.030 | ± 0.010 | 0.700 ~ 0.720 |
| 3PT | 1.05 | ±0.040 | ± 0.010 | 1.050~1.070 |
| 4PT | 1.42 | ±0.050 | ± 0.015 | 1.395–1.425 |
Tšusumetso ea Blade Angle ho Sehlahisoa
Khetho ea Lehare
1. Phapang ea Lithipa tse Mahlaseli a Phahameng le a Tlase
Phapang pakeng tsa lithipa tse bohale bo phahameng le tse tlaase ke hore thipa e bohale bo phahameng e thehiloe holim'a thipa e nang le bohale bo tlaase ebe e sila likhutlong ka mahlakoreng a mabeli ho etsa hore lehare la eona le be tšesaane, ka kakaretso hoo e ka bang 2mm.
Sephutheloana
| Botenya | Bongata ba Carton Box | Koele |
| 0.45mm (1.27PT) | 100Pcs / Lebokose | 100M / Coil |
| 0.53mm (1.5PT) | 100Pcs / Lebokose | 100M / Coil |
| 0.71mm (2PT) | 100Pcs / Lebokose | 100M / Coil |
| 1.07mm (3PT) | 70Pcs / Lebokose | 70M/Coil |
| 1.42mm (4PT) | 50Pcs / Lebokose | 50M/Coil |
| 2.10mm (6PT) | 35Pcs / Lebokose | 35M/Coil |
Sebaka sa kopo
Die-Cutting bakeng sa lebokose la ho paka
